The GEC4 R1 Filters

From ARL Wiki
Jump to navigationJump to search

The filter table is shown to the left, and the filter grid is shown to the right. For example, since filter 0 sends packets from MI 1 to a queue bound to MI 2, there will be a 0 in the filter grid entry corresponding to row MI In 1 and column MI Out 2. Note that filters 23, 24 and 25 match packets destined for R2 while filters 6, 7 and 8 match packets destined to H4, H5 or H6 (which are attached to R2). But the packets matching any of these six filters will be forwarded out meta-interface 4.

Filter From MI In To MI Out Queue
H1-H3 sending to H1-H3
0 H1 1 H2 10.1.2.0/24 2 3
1 H1 1 H3 10.1.3.0/24 3 6
2 H2 2 H1 10.1.1.0/24 1 0
3 H2 2 H3 10.1.3.0/24 3 6
4 H3 3 H1 10.1.1.0/24 1 0
5 H3 3 H2 10.1.2.0/24 2 3
H1-H3 sending to H4-H6 thru R2
6 H1 1 H4-6 10.1.4.0/24 4 9
7 H2 2 H4-6 10.1.4.0/24 4 10
8 H3 3 H4-6 10.1.4.0/24 4 11
H4-H6 sending to H1-H3 thru R2
9 R2/* 4 H1 10.1.1.0/24 1 0
10 R2/* 4 H2 10.1.2.0/24 2 3
11 R2/* 4 H3 10.1.3.0/24 3 6
H4-H6 sending to H1-H3 thru R3
12 R3/* 5 H1 10.1.1.0/24 1 0
13 R3/* 5 H2 10.1.2.0/24 2 3
14 R3/* 5 H3 10.1.3.0/24 3 6
GPE sending to H1-H3 and R2
15 GPE 0 H1 10.1.1.2/32 1 0
16 GPE 0 H2 10.1.2.2/32 2 3
17 GPE 0 H3 10.1.3.2/32 3 6
18 GPE 0 R2 10.1.16.2/32 4 11
H1-H3 sending to R1
19 * 1 GPE 10.1.16.1/32 0 48
20 * 2 GPE 10.1.16.1/32 0 48
21 * 3 GPE 10.1.16.1/32 0 48
22 * 4 GPE 10.1.16.1/32 0 48
H1-H3 sending to R2
23 H1 1 R2 10.1.16.2/32 4 9
24 H2 2 R2 10.1.16.2/32 4 10
25 H3 3 R2 10.1.16.2/32 4 11
MI In MI Out

0/GPE 1 2 3 4
0/GPE
15 16 17 18
1 19
0 1 6, 23
2 20 2
3 7, 24
3 21 4 5
8, 25
4 22 9 10 11
5
12 13 14