The GEC4 R1 Filters

From ARL Wiki
Revision as of 17:18, 11 December 2009 by Ken Wong (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

The filter table is shown to the left, and the filter grid is shown to the right. For example, since filter 0 sends packets from MI 1 to a queue bound to MI 2, there will be a 0 in the filter grid entry corresponding to row MI In 1 and column MI Out 2. Note that filters 23, 24 and 25 match packets destined for R2 while filters 6, 7 and 8 match packets destined to H4, H5 or H6 (which are attached to R2). But the packets matching any of these six filters will be forwarded out meta-interface 4.

Filter From MI In To MI Out Queue
H1-H3 sending to H1-H3
0 H1 1 H2 10.1.2.0/24 2 3
1 H1 1 H3 10.1.3.0/24 3 6
2 H2 2 H1 10.1.1.0/24 1 0
3 H2 2 H3 10.1.3.0/24 3 6
4 H3 3 H1 10.1.1.0/24 1 0
5 H3 3 H2 10.1.2.0/24 2 3
H1-H3 sending to H4-H6 thru R2
6 H1 1 H4-6 10.1.4.0/24 4 9
7 H2 2 H4-6 10.1.4.0/24 4 10
8 H3 3 H4-6 10.1.4.0/24 4 11
H4-H6 sending to H1-H3 thru R2
9 R2/* 4 H1 10.1.1.0/24 1 0
10 R2/* 4 H2 10.1.2.0/24 2 3
11 R2/* 4 H3 10.1.3.0/24 3 6
H4-H6 sending to H1-H3 thru R3
12 R3/* 5 H1 10.1.1.0/24 1 0
13 R3/* 5 H2 10.1.2.0/24 2 3
14 R3/* 5 H3 10.1.3.0/24 3 6
GPE sending to H1-H3 and R2
15 GPE 0 H1 10.1.1.2/32 1 0
16 GPE 0 H2 10.1.2.2/32 2 3
17 GPE 0 H3 10.1.3.2/32 3 6
18 GPE 0 R2 10.1.16.2/32 4 11
H1-H3 sending to R1
19 * 1 GPE 10.1.16.1/32 0 48
20 * 2 GPE 10.1.16.1/32 0 48
21 * 3 GPE 10.1.16.1/32 0 48
22 * 4 GPE 10.1.16.1/32 0 48
H1-H3 sending to R2
23 H1 1 R2 10.1.16.2/32 4 9
24 H2 2 R2 10.1.16.2/32 4 10
25 H3 3 R2 10.1.16.2/32 4 11
MI In MI Out

0/GPE 1 2 3 4
0/GPE
15 16 17 18
1 19
0 1 6, 23
2 20 2
3 7, 24
3 21 4 5
8, 25
4 22 9 10 11
5
12 13 14