The GEC4 R1 Filters

From ARL Wiki
Revision as of 21:48, 22 May 2009 by Ken Wong (talk | contribs)
Jump to navigationJump to search

The filter table is shown to the left, and the filter grid is shown to the right. A filter with a filter ID of x is named Fx in the tables (e.g., F3 is the filter with ID 3). Note that filters F23, F24 and F25 match packets destined for R2 while filters F6, F7 and F8 match packets destined to H4, H5 or H6 (which are attached to R2). But the packets matching any of these six filters will be forwarded out meta-interface 4.

Filter From MI In To MI Out Queue
H1-H3 sending to H1-H3
F0 H1 1 H2 10.1.2.0/24 2 3
F1 H1 1 H3 10.1.3.0/24 3 6
F2 H2 2 H1 10.1.1.0/24 1 0
F3 H2 2 H3 10.1.3.0/24 3 6
F4 H3 3 H1 10.1.1.0/24 1 0
F5 H3 3 H2 10.1.2.0/24 2 3
H1-H3 sending to H4-H6 thru R2
F6 H1 1 H4-6 10.1.4.0/24 4 9
F7 H2 2 H4-6 10.1.4.0/24 4 10
F8 H3 3 H4-6 10.1.4.0/24 4 11
H4-H6 sending to H1-H3 thru R2
F9 R2/* 4 H1 10.1.1.0/24 1 0
F10 R2/* 4 H2 10.1.2.0/24 2 3
F11 R2/* 4 H3 10.1.3.0/24 3 6
H4-H6 sending to H1-H3 thru R3
F12 R3/* 5 H1 10.1.1.0/24 1 0
F13 R3/* 5 H2 10.1.2.0/24 2 3
F14 R3/* 5 H3 10.1.3.0/24 3 6
GPE sending to H1-H3 and R2
F15 GPE 0 H1 10.1.1.2/32 1 0
F16 GPE 0 H2 10.1.2.2/32 2 3
F17 GPE 0 H3 10.1.3.2/32 3 6
F18 GPE 0 R2 10.1.16.2/32 4 11
H1-H3 sending to R1
F19 * 1 GPE 10.1.16.1/32 0 48
F20 * 2 GPE 10.1.16.1/32 0 48
F21 * 3 GPE 10.1.16.1/32 0 48
F22 * 4 GPE 10.1.16.1/32 0 48
H1-H3 sending to R2
F23 H1 1 R2 10.1.16.2/32 4 9
F24 H2 2 R2 10.1.16.2/32 4 10
F25 H3 3 R2 10.1.16.2/32 4 11

MI Out
MI In 0/GPE 1 2 3 4
0/GPE
F15 F16 F17 F18
1 F19
F0 F1 F6, F23
2 F20 F2
F3 F7, F24
3 F21 F4 F5
F8, F25
4 F22 F9 F10 F11
5
F12 F13 F14