The GENI SPP Configurations
From ARL Wiki
Revision as of 00:28, 7 February 2010 by Ken Wong (talk | contribs) (→Examples of Configuration Displays)
Contents
Getting SPP Configurations
The scfg (Slice Configuration) command can be used to display the attributes of SPP interfaces. The two most common commands are:
scfg --cmd get_ifaces # display attributes of all interfaces scfg --cmd get_peer --ifn N # display IP address of interface N's peer
Examples of the displays are shown at the end of this page. Enter:
scfg --help info
to see what other information command options there are.
IP Addresses
Washington DC:
Interface | Type | IP Address | Peer Address |
---|---|---|---|
0 | inet | 64.57.23.194 | 0.0.0.0 |
1 | inet | 64.57.23.198 | 0.0.0.0 |
2 | inet | 64.57.23.202 | 0.0.0.0 |
3 | p2p | 10.1.3.2 | 10.1.3.1 |
4 | p2p | 10.1.12.1 | 10.1.12.2 |
5 | p2p | 10.1.4.2 | 10.1.4.1 |
6 | p2p | 10.1.7.1 | 10.1.7.2 |
7 | p2p | 10.1.8.1 | 10.1.8.2 |
Salt Lake City:
Interface | Type | IP Address | Peer Address |
---|---|---|---|
0 | inet | 64.57.23.178 | 0.0.0.0 |
1 | inet | 64.57.23.182 | 0.0.0.0 |
2 | inet | 64.57.23.186 | 0.0.0.0 |
3 | p2p | 10.1.1.2 | 10.1.1.1 |
4 | p2p | 10.1.2.2 | 10.1.2.1 |
5 | p2p | 10.1.7.2 | 10.1.7.1 |
6 | p2p | 10.1.8.2 | 10.1.8.1 |
Kansas City:
Interface | Type | IP Address | Peer Address |
---|---|---|---|
0 | inet | 64.57.23.210 | 0.0.0.0 |
1 | inet | 64.57.23.214 | 0.0.0.0 |
2 | inet | 64.57.23.218 | 0.0.0.0 |
3 | p2p | 10.1.1.1 | 10.1.1.2 |
4 | p2p | 10.1.2.1 | 10.1.2.2 |
5 | p2p | 10.1.3.1 | 10.1.3.2 |
6 | p2p | 10.1.4.1 | 10.1.4.2 |
Resources
Examples of Configuration Displays
What follows is the output of the get-info.sh script for the three GENI SPPs. The annotated output below shows which commands were used to produce the output.
+++ Doing DC 64.57.23.194 Get list of available interfaces: scfg --cmd get_ifaces Interface list: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.194] [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.198] [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202] [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2] [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.12.1] [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2] [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1] [ifn 7, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1] Get IP address of peer: scfg --cmd get_peer --ifn N Interface 0 SPP Peer IP address: 0.0.0.0 Interface 1 SPP Peer IP address: 0.0.0.0 Interface 2 SPP Peer IP address: 0.0.0.0 Interface 3 SPP Peer IP address: 10.1.3.1 Interface 4 SPP Peer IP address: 10.1.12.2 Interface 5 SPP Peer IP address: 10.1.4.1 Interface 6 SPP Peer IP address: 10.1.7.2 Get interface attributes: scfg --cmd get_attrs --ifn N Interface 0 Interface attributes: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.194] Interface 1 Interface attributes: [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.198] Interface 2 Interface attributes: [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202] Interface 3 Interface attributes: [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2] Interface 4 Interface attributes: [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.12.1] Interface 5 Interface attributes: [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2] Interface 6 Interface attributes: [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1] +++ Doing SLC 64.57.23.210 Get list of available interfaces: scfg --cmd get_ifaces Interface list: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.210] [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.214] [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.218] [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.2] [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.2] [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.2] [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2] Get IP address of peer: scfg --cmd get_peer --ifn N Interface 0 SPP Peer IP address: 0.0.0.0 Interface 1 SPP Peer IP address: 0.0.0.0 Interface 2 SPP Peer IP address: 0.0.0.0 Interface 3 SPP Peer IP address: 10.1.1.1 Interface 4 SPP Peer IP address: 10.1.2.1 Interface 5 SPP Peer IP address: 10.1.7.1 Interface 6 SPP Peer IP address: 10.1.8.1 Get interface attributes: scfg --cmd get_attrs --ifn N Interface 0 Interface attributes: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.210] Interface 1 Interface attributes: [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.214] Interface 2 Interface attributes: [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.218] Interface 3 Interface attributes: [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.2] Interface 4 Interface attributes: [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.2] Interface 5 Interface attributes: [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.2] Interface 6 Interface attributes: [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2] +++ Doing KC 64.57.23.178 Get list of available interfaces: scfg --cmd get_ifaces Interface list: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.178] [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.182] [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.186] [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.1] [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.1] [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.1] [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1] Get IP address of peer: scfg --cmd get_peer --ifn N Interface 0 SPP Peer IP address: 0.0.0.0 Interface 1 SPP Peer IP address: 0.0.0.0 Interface 2 SPP Peer IP address: 0.0.0.0 Interface 3 SPP Peer IP address: 10.1.1.2 Interface 4 SPP Peer IP address: 10.1.2.2 Interface 5 SPP Peer IP address: 10.1.3.2 Interface 6 SPP Peer IP address: 10.1.4.2 Get interface attributes: scfg --cmd get_attrs --ifn N Interface 0 Interface attributes: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.178] Interface 1 Interface attributes: [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.182] Interface 2 Interface attributes: [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.186] Interface 3 Interface attributes: [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.1] Interface 4 Interface attributes: [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.1] Interface 5 Interface attributes: [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.1] Interface 6 Interface attributes: [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1]