The GENI SPP Configurations

From ARL Wiki
Jump to navigationJump to search


Getting SPP Configurations

The scfg (Slice Configuration) command can be used to display the attributes of SPP interfaces. The two most common commands are:

scfg --cmd get_ifaces           # display attributes of all interfaces
scfg --cmd get_peer --ifn N     # display IP address of interface N's peer

Examples of the displays are shown at the end of this page. Enter:

scfg --help info

to see what other information command options there are.

IP Addresses

Washington DC:

Interface Type IP Address Peer Address
0 inet 64.57.23.194 0.0.0.0
1 inet 64.57.23.198 0.0.0.0
2 inet 64.57.23.202 0.0.0.0
3 p2p 10.1.3.2 10.1.3.1
4 p2p 10.1.12.1 10.1.12.2
5 p2p 10.1.4.2 10.1.4.1
6 p2p 10.1.7.1 10.1.7.2
7 p2p 10.1.8.1 10.1.8.2

Salt Lake City:

Interface Type IP Address Peer Address
0 inet 64.57.23.178 0.0.0.0
1 inet 64.57.23.182 0.0.0.0
2 inet 64.57.23.186 0.0.0.0
3 p2p 10.1.1.2 10.1.1.1
4 p2p 10.1.2.2 10.1.2.1
5 p2p 10.1.7.2 10.1.7.1
6 p2p 10.1.8.2 10.1.8.1

Kansas City:

Interface Type IP Address Peer Address
0 inet 64.57.23.210 0.0.0.0
1 inet 64.57.23.214 0.0.0.0
2 inet 64.57.23.218 0.0.0.0
3 p2p 10.1.1.1 10.1.1.2
4 p2p 10.1.2.1 10.1.2.2
5 p2p 10.1.3.1 10.1.3.2
6 p2p 10.1.4.1 10.1.4.2

Resources

Examples of Configuration Displays

What follows is the output of the get-info.sh script for the three GENI SPPs. The annotated output below shows which commands were used to produce the output.

+++ Doing DC 64.57.23.194

Get list of available interfaces:  scfg --cmd get_ifaces

Interface list:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.194]
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.198]
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202]
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2]
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.12.1]
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2]
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1]
  [ifn 7, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1]

Get IP address of peer:  scfg --cmd get_peer --ifn N

Interface 0 SPP Peer IP address: 0.0.0.0
Interface 1 SPP Peer IP address: 0.0.0.0
Interface 2 SPP Peer IP address: 0.0.0.0
Interface 3 SPP Peer IP address: 10.1.3.1
Interface 4 SPP Peer IP address: 10.1.12.2
Interface 5 SPP Peer IP address: 10.1.4.1
Interface 6 SPP Peer IP address: 10.1.7.2

Get interface attributes:  scfg --cmd get_attrs --ifn N

Interface 0 Interface attributes:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.194]
Interface 1 Interface attributes:
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.198]
Interface 2 Interface attributes:
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202]
Interface 3 Interface attributes:
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2]
Interface 4 Interface attributes:
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.12.1]
Interface 5 Interface attributes:
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2]
Interface 6 Interface attributes:
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1]

+++ Doing SLC 64.57.23.210

Get list of available interfaces:  scfg --cmd get_ifaces

Interface list:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.210]
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.214]
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.218]
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.2]
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.2]
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.2]
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2]

Get IP address of peer:  scfg --cmd get_peer --ifn N

Interface 0 SPP Peer IP address: 0.0.0.0
Interface 1 SPP Peer IP address: 0.0.0.0
Interface 2 SPP Peer IP address: 0.0.0.0
Interface 3 SPP Peer IP address: 10.1.1.1
Interface 4 SPP Peer IP address: 10.1.2.1
Interface 5 SPP Peer IP address: 10.1.7.1
Interface 6 SPP Peer IP address: 10.1.8.1

Get interface attributes:  scfg --cmd get_attrs --ifn N

Interface 0 Interface attributes:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.210]
Interface 1 Interface attributes:
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.214]
Interface 2 Interface attributes:
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.218]
Interface 3 Interface attributes:
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.2]
Interface 4 Interface attributes:
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.2]
Interface 5 Interface attributes:
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.2]
Interface 6 Interface attributes:
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2]

+++ Doing KC 64.57.23.178

Get list of available interfaces:  scfg --cmd get_ifaces

Interface list:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.178]
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.182]
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.186]
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.1]
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.1]
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.1]
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1]

Get IP address of peer:  scfg --cmd get_peer --ifn N

Interface 0 SPP Peer IP address: 0.0.0.0
Interface 1 SPP Peer IP address: 0.0.0.0
Interface 2 SPP Peer IP address: 0.0.0.0
Interface 3 SPP Peer IP address: 10.1.1.2
Interface 4 SPP Peer IP address: 10.1.2.2
Interface 5 SPP Peer IP address: 10.1.3.2
Interface 6 SPP Peer IP address: 10.1.4.2

Get interface attributes:  scfg --cmd get_attrs --ifn N

Interface 0 Interface attributes:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.178]
Interface 1 Interface attributes:
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.182]
Interface 2 Interface attributes:
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.186]
Interface 3 Interface attributes:
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.1]
Interface 4 Interface attributes:
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.1]
Interface 5 Interface attributes:
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.1]
Interface 6 Interface attributes:
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1]