Using the IPv4 Code Option

From ARL Wiki
Revision as of 16:24, 16 March 2010 by Ken Wong (talk | contribs)
Jump to navigationJump to search

Template:Under Construction

Introduction

An SPP is a PlanetLab node that combines the high-performance and programmability of Network Processors (NPs) with the programmability of general-purpose processors (GPEs). The Hello GPE World Tutorial page described how to use a GPE. This page describes the SPP's fastpath (NP) features using the IPv4 code option as an example. Those features include:

  • Bandwidth, queue, filter and memory resources
  • Logical interfaces (meta-interfaces) within each physical interface
  • Packet scheduling queues and their binding to meta-interfaces
  • Filters for forwarding packets to queues

Like any PlanetLab node, the SPP runs a server on each GPE that allows a user to allocate a subset of a node's resources called a slice. Although an SPP user can prototype a new router by writing a socket program for the GPE, the SPP's high performance can only be tapped by using a SPP's NP. That is, use a fastpath-slowpath packet processing paradigm where the fastpath uses NPs to process data packets at high speed while the slowpath uses GPEs to handle control and exception packets. The SPP's IPv4 code option is an example of this fastpath-slowpath paradigm.

This page describes a simple IPv4 code option and in doing so, illustrates the fastpath-slowpath paradigm that would be in any high-speed implementation. Configuring the SPP so that it will process IPv4 packets using the IPv4 code option involves these steps:

  • Allocate (and configure) a fastpath (FP)
  • Create one or more meta-interfaces (MIs)
  • Create and configure packet queues, and bind each queue to an MI
  • Install filters to direct incoming packets to packet queues

A fastpath creation request specifies your desire for SPP resources such as interface bandwidths, queues, filters and memory. Once you are granted those resources, you define meta-interfaces within the fastpath and structure meta-interfaces and resources for packet forwarding.

The SPP Fastpath

SPP Substrate Network

A network of nodes containing SPPs is formed by connecting the nodes with UDP tunnels. This network forms a substrate which can carry packets from one or more user slices. The nodes can be SPPs, hosts (PlanetLab and non-PlanetLab), or any packet processors that support this paradigm. A UDP tunnel has two endpoints, each defined by an (IP address, UDP port) pair. Note that this address-port pair is from the addressing domain of the substrate, not the slice. Also, note that an SPP node:

  • Has multiple physical interfaces, each with an IP address.
  • Can support concurrent traffic from multiple SPP slices (users) at each interface.
Substrate Packet

A packet that travels through this network of SPPs has an outer (substrate) header, an inner (slice) header and a payload (packet content); i.e., a slice's packet is encapsulated in a substrate IP/UDP packet. If an SPP has been configured to process the packet using the fastpath, the packet is sent to the NPE where the substrate header is removed to expose the slice's packet. The NPE processes the slice's packet and encapsulates the packet in an IP/UDP packet before forwarding the packet out of one of its interfaces. In the case of an IPv4 slice, an IPv4 packet is encapsulated in another IPv4 packet.

Meta-Interfaces, Filters and Queues


A meta-interface (MI) is a fastpath endpoint; i.e., it is denoted by an (IP address, UDP port) pair. The IP address is the address of a physical interface, and the UDP port number is chosen to distinguish the user's traffic from other traffic that shares the same physical interface. Since the primary function of a router is to forward incoming packets to the next destination (or next hop), a fastpath slice has to have enough meta-interfaces to accept packets from its neighboring nodes and forward them to the next-hop nodes.

The figure (right) shows some of the paths that a packet from H1 can take through the FP of the R1 router. For simplicity, the diagram doesn't show resources used by packets from other nodes. The figure shows these FP features:

  • There are five meta-interfaces labeled m0-m4.
  • The blocks labeled f19, f6, f23, f0 and f1 are filters that direct slice packets to queues q48 q9, q3 and q6. Queues q10, q11 and q0 are not used by packets coming from H1).
  • More than one queue (e.g., q9, q10, q11) can be bound to one meta-interface.

The example below shows additional features:

  • The GPE can inject packets into the FP.
  • The complete set of filters form the router's forwarding table.
  • Exception packets (e.g., bad slice packet header) are sent to the GPE for further processing.
  • Traffic through queues can be monitored using stats indices which in turn can be displayed.

The example also shows how to:

  • Reserve FP resources and then create a FP for the IPv4 code option.
  • Create FP endpoints (meta-interfaces (MIs)) with bandwidth guarantees.
  • Create and configure queues with drop thresholds and bandwidth guarantees.
  • Bind queues to MIs.
  • Install IPv4 filters.
  • Monitor traffic.

Utilities and Daemons

Several utilities and daemons are used in the example:

  • scfg (slice configuration)
    • Used to get SPP information, reserve resources, configure queues and allocate/free resources
  • ip_fpc (IPv4 filter configuration)
    • Used to create IPv4 filters
  • ip_fpd (IPv4 daemon)
    • Used to create an IPv4 fastpath and process IPv4 local-delivery and exception traffic
  • sliced (slice statistics daemon)
    • Used to process statistics monitoring requests

The executables are in the directory /usr/local/bin/ on each SPP slice.

Example

IPv4 Slice Example 1

The figure (right) shows the main parts of the IPv4 slice described below. The symbols S, D, S' and D' are used to denote hosts and the traffic processes running on those hosts. The example includes one SPP (labeled R) which includes the GPE host D', and three other hosts (labeled S, S' and D). There are two traffic flows: 1) a unidirectional flow from S to D; and 2) a bidirectional flow between S' and D'. The slice traffic between S' and D' is ping traffic (ICMP echo request packets from S' to D', and ICMP echo reply packets from D' to S').

The IPv4 slice uses four slice interfaces (m0, m1, m2, and m3), four queues (q0, q1, q8 and q9) and three filters (f0, f1 and f2). In the flow between S' and D':

  • An incoming packet containing an IPv4 ping packet from S' is stripped of its outer header and directed to queue q8 by filter f0.
  • The ip_fpd daemon process (labeled as D') running on a GPE reads the echo request packet from queue q8, forms an echo reply packet, and injects the packet into the FP.
  • The echo reply packet will be placed into queue q0 by filter f1.
  • The packet is encapsulated into an IP/UDP packet and sent out MI 1.
  • Finally, the encapsulated ICMP echo reply packet arrives back at S'.

In the flow from S to D:

  • An incoming slice packet from S to MI m2 is stripped of its outer header and directed to queue q2 by filter f2.
  • The packet is encapsulated into an IP/UDP packet and sent out MI m3.
  • Finally, the encapsulated IP/UDP packet arrives at D.

This example will show the basics of using the IPv4 slice. It can be easily extended in a number of ways:

  • Include more flows and a greater variety of flows.
  • Add filters to provide more discrimination for packet forwarding.
  • Add queues and configure filters to give some flows preferential treatment.
  • Add another SPP and more hosts to form a larger network.

The exercises and their discussion explore these extensions further.

Preparation

XXXXX getting files, etc

Running the Example (Overview)

XXXXX


Setting up the SPP to use the fastpath resembles the procedure used to setup the slowpath in The Hello GPE World Tutorial but with several additional steps:

  • Run the mkResFile4IPex.sh script to create a resource reservation file.
  • Run the setupIPex.sh script to configure the SPP which includes:
    • Submit the resource reservation.
    • Claim the resources described by the reservation file.
    • Setup a slowpath endpoint for monitoring traffic
    • Start the ip_fpd fastpath daemon
    • Create all of the fastpath queues and set their drop and scheduling parameters.
    • Create all of the filters for packet forwarding.

In the six steps listed above in the setup script, only the last three are completely specific to the fastpath. Although the details of the first three differ from the slowpath setup, the basic idea is the same.

Create a Resource Reservation File

As in The Hello GPE World Tutorial, you can hand edit a res.xml file or run a script to generate a reservation file for this example. See the reservation file ~/ipv4-fp/res.xml and the script ~/ipv4-fp/mkResFile4IPex.sh. The res.xml file for the Salt Lake City SPP looks like this: 

    <?xml version="1.0" encoding="utf-8" standalone="yes"?>
    <spp>
      <rsvRecord>
        <!-- Date Format:  YYYYMMDDHHmmss -->
        <!-- That's year, month, day, hour, minutes, seconds -->
        <rDate start="20100310150100" end="20100410150100" />

        <!-- fastpath -->
        <fpRSpec name="fp9">
          <fpParams>
            <copt>1</copt>
            <bwspec firm="100000" soft="0" />
            <rcnts fltrs="10" queues="10" buffs="1000" stats="10" />
            <mem sram="4096" dram="0" />
          </fpParams>
        <ifParams>
            <ifRec bw="20000" ip="64.57.23.210" />
            <ifRec bw="20000" ip="64.57.23.214" />
            <ifRec bw="20000" ip="64.57.23.218" />
        </ifParams>
        </fpRSpec>

        <!-- slowpath -->
        <plRSpec>
          <ifParams>
            <!-- reserve 5 Mb/s on one interface -->
            <ifRec bw="5000" ip="64.57.23.210" />
          </ifParams>
        </plRSpec>
      </rsvRecord>
    </spp>

This reservation file includes not only a slowpath component (plRSpec), but also a fastpath component (fpRSpec).

The fastpath component contains the following:

  • The fastpath name is fp9 and is used when claiming the resources.
  • The fastpath parameters are:
    • Code option 1 which denotes IPv4.
    • A guaranteed aggregate bandwidth of 100,000 Kbps (i.e., 100 Mbps) which the user can divide among the interfaces listed in the ifParams section of the reservation.
    • Maximum resource counts of 10 filters, 10 queues, 1000 buffers and 10 stats indices which indicate the maximum number of each resource type to be used.
    • Maximum memory of XXXXX which XXXXX
  • The interface parameters are:
    • The guaranteed bandwidths of 20,000 Kbps that will be taken from the capacities of the three interfaces 64.57.23.210, 64.57.23.214 and 64.57.23.218.

Resource identifiers (e.g., filter identifier) are numbered from 0 to N-1 where N is the maximum number of declaried resources. For example, since there is a maximum of 10 filters, the filter identifiers that the user can user are 0 to 9 inclusive. The maximum number of queues also indicates that the QIDs (queue identifiers) of the two special queues for error (exception) packets and local delivery packets are N-1 and N-2 respectively. In our example, that means that queue 9 will be used for error packets and queue 8 will be used for local delivery packets.

Note that the sum of the guaranteed bandwidths of the three interfaces is only 60 Mbps and is less than the 100 Mbps of the entire fastpath. The only requirement is that the total of all interface bandwidths can not exceed the fastpath's aggregate bandwidth parameter.

Unlike the example in The Hello GPE World Tutorial where the slowpath endpoint was used to process packets, the slowpath endpoint here will be used for traffic monitoring data.

Setup the SPP

The setupIPex.sh script is used to make a reservation and configure the SPP for this example. Below is a sketch of the script showing the utility/daemon used and the general form of the commands: 

    scfg --cmd make_reserv                 # Make reservation
    scfg --cmd claim_resources             # Claim resources
    scfg --cmd setup_sp_endpoint ...       # Setup SP endpoint (traffic monitoring)

    ip_fpd -fpName fp9 ... > ip_fpd.log &  # Create FP; daemon continues to handle LD&EX pkts

    scfg --cmd set_queue_params ...        # Set queue params for LD&EX queues
   ## REPEAT FOR ALL FP endpoints:
    scfg --cmd setup_fp_tunnel ...         #   Setup MI,
    scfg --cmd bind_queue ...              #   Bind queue to MI,
    scfg --cmd set_queue_params ...        #   Set queue params
   ## REPEAT FOR ALL filters:
    ip_fpc --cmd write_fltr ...            #   Create filter

Now, let's look at the script in detail.

Reserve and Claim Resources

    scfg --cmd make_reserv --xfile res.xml      # Make reservation
    scfg --cmd claim_resources                  # Claim resources
  • res.xml is the reservation file we created earlier.
  • claim_resources obtains the slowpath and fastpath resources specified in the current reservation.

XXXXX

Create the Slowpath Endpoint for Monitoring

    scfg --cmd setup_sp_endpoint --bw 1000 --ipaddr 64.57.23.210 --port 3551 --proto 6
  • guaranteed bandwidth: 1000 Kbps
  • use slowpath endpoint (64.57.23.210, 3551) for monitoring
    • sliced command: "sliced --ip 64.57.23.194 --port 3551 &"
    • sliced sends counter values in TCP packets to the remote SPPmon GUI
    • 64.57.23.210 is the IP address of the Salt Lake City SPP's interface 0

XXXXX

Create a Fastpath Instance and the ip_fpd Daemon

    ip_fpd --fpName fp9 --myIP 9.9.2.249 --myPort 5556 > ip_fpd.log &
  • Run the ip_fpd daemon on a GPE in the background
    • Claims fastpath resources
    • Tells RMP to load and initialize the IPv4 code option
    • Daemon handles local delivery and error packets in the background
    • Gets packets from two queues with the highest QIDs through the vserver
    • Local delivery packets: Packets addressed to the fastpath's IP address.
      • ip_fpd can inject a response packet back into the fastpath
    • Error packets: Packets flagged by the fastpath as errors
      • e.g., TTL expired (ip_fpd generates ICMP packet)
  • fp9 is the name of the fastpath in the res.xml reservation file
  • The IP address of the fastpath slice is 9.9.2.249
  • Port: XXX

Note:

  • a filter puts local delivery packets into the local delivery queue
  • another filter directs the slowpath response to another queue
  • the fastpath code option puts error packets into the error queue
  • a vserver passes the local delivery and error packets to the ip_fpd daemon

XXXXX

Configure the Local Delivery and Error Queues

    scfg --cmd set_queue_params --fpid 0 --qid 9 --threshold 100 --bw 1000
    scfg --cmd set_queue_params --fpid 0 --qid 8 --threshold 100 --bw 1000
  • If the reservation file specifies a maximum of N queues, queue N-1 is used for error packets and queue N-1 is used for local delivery packets.
    • We requested 10 queues. So, queue 9 is for error packets, and queue 8 is for local delivery packets.
  • The two queues are created by the ip_fpd daemon during intialization.
  • These two commands set the drop threshold (100 packets) and guaranteed bandwidths (1000 Kbps) of those two queues

>>>>> HERE <<<<<

XXXXX

Create Tunnels

    scfg --cmd setup_fp_tunnel --fpid 0 --ipaddr 64.57.23.210 --port 19001 --bw 10000
  • Need to create a fastpath endpoint for:
    • Local delivery packets (packets addressed to this router) and their responses
    • Incoming transit packets
    • Outgoing transit packets
  • The example uses four interfaces (shown as m0, m1, m2, m3)
  • --fpid: Fastpath ID is always 0 (for now)
  • --ipaddr, --port: fastpath endpoint
  • --bw: guaranteed bandwidth of 10,000 Kbps

Repeat for (64.57.23.214, 19001) and (64.57.23.218, 19001).

XXXXX

Bind and Configure Queues

    scfg --cmd setup_fp_tunnel --fpid 0 --ipaddr 64.57.23.210 --port 19001 --bw 10000
    scfg --cmd bind_queue --fpid 0 --miid $? --qid_list_type 0 --qid_list 0
    scfg --cmd set_queue_params --fpid 0 --qid 0 --threshold 100 --bw 1000

XXXXX

Create IPv4 Filters

    ip_fpc --cmd write_fltr --fpid 0 --fid 2 \
        --keytype 0 --key_rxmi 2 \
        --key_daddr 9.9.1.1 --key_saddr 0 --key_sport 0 --key_dport 0 --key_proto 0 \
        --mask_daddr 0xFFFFFFFF --mask_saddr 0 --mask_dport 0 --mask_sport 0 --mask_flags 0 \
        --txdaddr 128.252.153.98 --txdport 19000 --qid 1 --sindx 2

    ip_fpc --cmd write_fltr --fpid 0 --fid 0 \
        --keytype 0 --key_rxmi 1 \
        --key_daddr 0 --key_saddr 0 --key_sport 0 --key_dport 0 --key_proto 0 \
        --mask_daddr 0xFFFFFFFF --mask_saddr 0 --mask_dport 0 --mask_sport 0 --mask_flags 0 \
        --res_ld --txdaddr 0 --txdport 0 --qid 8 --sindx 0

    ip_fpc --cmd write_fltr --fpid 0 --fid 1 \
        --keytype 1 --key_rxmi 0 \
        --key_daddr 128.252.153.99 --key_saddr 0 --key_sport 0 --key_dport 0 --key_proto 0 \
        --mask_daddr 0xFFFFFFFF --mask_saddr 0 --mask_dport 0 --mask_sport 0 --mask_flags 0 \
        --txdaddr 128.252.153.99 --txdport 99999 --qid 0 --sindx 1

XXXXX



XXXXX setup script setupFP1.sh

  • MIs
    • Implicit MI 0 for LD and EX
    • 1 for each FP EP plus MI 0 (LD, EX)
  • Filters
    • direct incoming packet to queue
    • For LD: "--txdaddr 0 --txdport 0 --qid 0"
  • Queues
    • each queue is bound to an MI
    • each MI can have 1 or more queues
    • q$N for EX and q${N-1} for LD where $N is #queues
    • pkt scheduling: weighted fair queueing

Send Traffic to a Fastpath Slice

XXXXX

Teardown the SPP

XXXXX teardown script teardownFP1.sh

Monitoring Traffic

XXXXX

Exercises

XXXXX

Retrieved from "http://wiki.arl.wustl.edu/index.php?title=Using_the_IPv4_Code_Option&oldid=1051"