Difference between revisions of "The Hello GPE World Tutorial"
From ARL Wiki
Jump to navigationJump to search (New page: Category: The SPP Category: The SPP Tutorial = The SPP Components = = Packet Pathways = === Ping Packets === === Packets to a GPE === === Packets to the NPE === === P...) |
|||
Line 1: | Line 1: | ||
+ | {{Template: Under Construction}} | ||
[[Category: The SPP]] | [[Category: The SPP]] | ||
[[Category: The SPP Tutorial]] | [[Category: The SPP Tutorial]] | ||
Line 43: | Line 44: | ||
= Testing the Echo Client and Server = | = Testing the Echo Client and Server = | ||
+ | |||
+ | |||
+ | |||
+ | [[Category:The SPP]] | ||
+ | |||
+ | = Getting SPP Configurations = | ||
+ | |||
+ | The ''scfg'' (Slice Configuration) command can be used to display the attributes of SPP interfaces. | ||
+ | The two most common commands are: | ||
+ | |||
+ | <pre> | ||
+ | scfg --cmd get_ifaces # display attributes of all interfaces | ||
+ | scfg --cmd get_peer --ifn N # display IP address of interface N's peer | ||
+ | </pre> | ||
+ | |||
+ | Examples of the displays are shown at the end of this page. | ||
+ | Enter: | ||
+ | |||
+ | <pre> | ||
+ | scfg --help info | ||
+ | </pre> | ||
+ | |||
+ | to see what other information command options there are. | ||
+ | |||
+ | = IP Addresses = | ||
+ | |||
+ | '''Washington DC:''' | ||
+ | |||
+ | {| border=1 cellspacing=0 cellpadding=3 | ||
+ | ! Interface || Type || IP Address || Peer Address | ||
+ | |- align="center" | ||
+ | | 0 || inet || 64.57.23.194 || 0.0.0.0 | ||
+ | |- align="center" | ||
+ | | 1 || inet || 64.57.23.198 || 0.0.0.0 | ||
+ | |- align="center" | ||
+ | | 2 || inet || 64.57.23.202 || 0.0.0.0 | ||
+ | |- align="center" | ||
+ | | 3 || p2p || 10.1.3.2 || 10.1.3.1 (KC ifn 5) | ||
+ | |- align="center" | ||
+ | | 4 || p2p || 10.1.4.2 || 10.1.4.1 (KC ifn 6) | ||
+ | |- align="center" | ||
+ | | 5 || p2p || 10.1.7.1 || 10.1.7.2 (SLC ifn 5) | ||
+ | |- align="center" | ||
+ | | 6 || p2p || 10.1.8.1 || 10.1.8.2 (SLC ifn 6) | ||
+ | |} | ||
+ | |||
+ | '''Salt Lake City:''' | ||
+ | |||
+ | {| border=1 cellspacing=0 cellpadding=3 | ||
+ | ! Interface || Type || IP Address || Peer Address | ||
+ | |- align="center" | ||
+ | | 0 || inet || 64.57.23.178 || 0.0.0.0 | ||
+ | |- align="center" | ||
+ | | 1 || inet || 64.57.23.182 || 0.0.0.0 | ||
+ | |- align="center" | ||
+ | | 2 || inet || 64.57.23.186 || 0.0.0.0 | ||
+ | |- align="center" | ||
+ | | 3 || p2p || 10.1.1.2 || 10.1.1.1 (KC ifn 3) | ||
+ | |- align="center" | ||
+ | | 4 || p2p || 10.1.2.2 || 10.1.2.1 (KC ifn 4) | ||
+ | |- align="center" | ||
+ | | 5 || p2p || 10.1.7.2 || 10.1.7.1 (DC ifn 5) | ||
+ | |- align="center" | ||
+ | | 6 || p2p || 10.1.8.2 || 10.1.8.1 (DC ifn 6) | ||
+ | |} | ||
+ | '''Kansas City:''' | ||
+ | |||
+ | {| border=1 cellspacing=0 cellpadding=3 | ||
+ | ! Interface || Type || IP Address || Peer Address | ||
+ | |- align="center" | ||
+ | | 0 || inet || 64.57.23.210 || 0.0.0.0 | ||
+ | |- align="center" | ||
+ | | 1 || inet || 64.57.23.214 || 0.0.0.0 | ||
+ | |- align="center" | ||
+ | | 2 || inet || 64.57.23.218 || 0.0.0.0 | ||
+ | |- align="center" | ||
+ | | 3 || p2p || 10.1.1.1 || 10.1.1.2 (SLC ifn 3) | ||
+ | |- align="center" | ||
+ | | 4 || p2p || 10.1.2.1 || 10.1.2.2 (SLC ifn 4) | ||
+ | |- align="center" | ||
+ | | 5 || p2p || 10.1.3.1 || 10.1.3.2 (DC ifn 3) | ||
+ | |- align="center" | ||
+ | | 6 || p2p || 10.1.4.1 || 10.1.4.2 (DC ifn 4) | ||
+ | |} | ||
+ | |||
+ | = Resources = | ||
+ | |||
+ | = Examples of Configuration Displays = | ||
+ | |||
+ | What follows is the output of the ''get-info.sh'' script for the three GENI SPPs. | ||
+ | The annotated output below shows which commands were used to produce the output. | ||
+ | |||
+ | <pre> | ||
+ | << DC 64.57.23.194 >> | ||
+ | |||
+ | Get list of available interfaces: scfg --cmd get_ifaces | ||
+ | |||
+ | Interface list: | ||
+ | [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.194] | ||
+ | [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.198] | ||
+ | [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202] | ||
+ | [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2] | ||
+ | [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2] | ||
+ | [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1] | ||
+ | [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1] | ||
+ | |||
+ | Get IP address of peer: scfg --cmd get_peer --ifn N | ||
+ | |||
+ | Interface 0 SPP Peer IP address: 0.0.0.0 | ||
+ | Interface 1 SPP Peer IP address: 0.0.0.0 | ||
+ | Interface 2 SPP Peer IP address: 0.0.0.0 | ||
+ | Interface 3 SPP Peer IP address: 10.1.3.1 | ||
+ | Interface 4 SPP Peer IP address: 10.1.4.1 | ||
+ | Interface 5 SPP Peer IP address: 10.1.7.2 | ||
+ | Interface 6 SPP Peer IP address: 10.1.8.2 | ||
+ | |||
+ | Get interface attributes: scfg --cmd get_attrs --ifn N | ||
+ | |||
+ | Interface 0 Interface attributes: | ||
+ | [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.194] | ||
+ | Interface 1 Interface attributes: | ||
+ | [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.198] | ||
+ | Interface 2 Interface attributes: | ||
+ | [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202] | ||
+ | Interface 3 Interface attributes: | ||
+ | [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2] | ||
+ | Interface 4 Interface attributes: | ||
+ | [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2] | ||
+ | Interface 5 Interface attributes: | ||
+ | [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1] | ||
+ | Interface 6 Interface attributes: | ||
+ | [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1] | ||
+ | |||
+ | << SLC 64.57.23.210 >> | ||
+ | |||
+ | Get list of available interfaces: scfg --cmd get_ifaces | ||
+ | |||
+ | Interface list: | ||
+ | [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.210] | ||
+ | [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.214] | ||
+ | [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.218] | ||
+ | [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.2] | ||
+ | [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.2] | ||
+ | [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.2] | ||
+ | [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2] | ||
+ | |||
+ | Get IP address of peer: scfg --cmd get_peer --ifn N | ||
+ | |||
+ | Interface 0 SPP Peer IP address: 0.0.0.0 | ||
+ | Interface 1 SPP Peer IP address: 0.0.0.0 | ||
+ | Interface 2 SPP Peer IP address: 0.0.0.0 | ||
+ | Interface 3 SPP Peer IP address: 10.1.1.1 | ||
+ | Interface 4 SPP Peer IP address: 10.1.2.1 | ||
+ | Interface 5 SPP Peer IP address: 10.1.7.1 | ||
+ | Interface 6 SPP Peer IP address: 10.1.8.1 | ||
+ | |||
+ | Get interface attributes: scfg --cmd get_attrs --ifn N | ||
+ | |||
+ | Interface 0 Interface attributes: | ||
+ | [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.210] | ||
+ | Interface 1 Interface attributes: | ||
+ | [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.214] | ||
+ | Interface 2 Interface attributes: | ||
+ | [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.218] | ||
+ | Interface 3 Interface attributes: | ||
+ | [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.2] | ||
+ | Interface 4 Interface attributes: | ||
+ | [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.2] | ||
+ | Interface 5 Interface attributes: | ||
+ | [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.2] | ||
+ | Interface 6 Interface attributes: | ||
+ | [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2] | ||
+ | |||
+ | << KC 64.57.23.178 >> | ||
+ | |||
+ | Get list of available interfaces: scfg --cmd get_ifaces | ||
+ | |||
+ | Interface list: | ||
+ | [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.178] | ||
+ | [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.182] | ||
+ | [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.186] | ||
+ | [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.1] | ||
+ | [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.1] | ||
+ | [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.1] | ||
+ | [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1] | ||
+ | |||
+ | Get IP address of peer: scfg --cmd get_peer --ifn N | ||
+ | |||
+ | Interface 0 SPP Peer IP address: 0.0.0.0 | ||
+ | Interface 1 SPP Peer IP address: 0.0.0.0 | ||
+ | Interface 2 SPP Peer IP address: 0.0.0.0 | ||
+ | Interface 3 SPP Peer IP address: 10.1.1.2 | ||
+ | Interface 4 SPP Peer IP address: 10.1.2.2 | ||
+ | Interface 5 SPP Peer IP address: 10.1.3.2 | ||
+ | Interface 6 SPP Peer IP address: 10.1.4.2 | ||
+ | |||
+ | Get interface attributes: scfg --cmd get_attrs --ifn N | ||
+ | |||
+ | Interface 0 Interface attributes: | ||
+ | [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.178] | ||
+ | Interface 1 Interface attributes: | ||
+ | [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.182] | ||
+ | Interface 2 Interface attributes: | ||
+ | [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.186] | ||
+ | Interface 3 Interface attributes: | ||
+ | [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.1] | ||
+ | Interface 4 Interface attributes: | ||
+ | [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.1] | ||
+ | Interface 5 Interface attributes: | ||
+ | [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.1] | ||
+ | Interface 6 Interface attributes: | ||
+ | [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1] | ||
+ | </pre> |
Revision as of 03:41, 26 February 2010
Contents
- 1 The SPP Components
- 2 Packet Pathways
- 3 Getting Information About Interfaces
- 4 Getting Information About Peers
- 5 Creating a Slowpath (GPE) Endpoint
- 6 Making a Resource Reservation
- 7 Testing the Echo Client and Server
- 8 Getting SPP Configurations
- 9 IP Addresses
- 10 Resources
- 11 Examples of Configuration Displays
The SPP Components
Packet Pathways
Ping Packets
Packets to a GPE
Packets to the NPE
Packets to a GPE via the NPE
Getting Information About Interfaces
Getting Information About Peers
Creating a Slowpath (GPE) Endpoint
Echo Client/Server
Making a Resource Reservation
Testing the Echo Client and Server
Getting SPP Configurations
The scfg (Slice Configuration) command can be used to display the attributes of SPP interfaces. The two most common commands are:
scfg --cmd get_ifaces # display attributes of all interfaces scfg --cmd get_peer --ifn N # display IP address of interface N's peer
Examples of the displays are shown at the end of this page. Enter:
scfg --help info
to see what other information command options there are.
IP Addresses
Washington DC:
Interface | Type | IP Address | Peer Address |
---|---|---|---|
0 | inet | 64.57.23.194 | 0.0.0.0 |
1 | inet | 64.57.23.198 | 0.0.0.0 |
2 | inet | 64.57.23.202 | 0.0.0.0 |
3 | p2p | 10.1.3.2 | 10.1.3.1 (KC ifn 5) |
4 | p2p | 10.1.4.2 | 10.1.4.1 (KC ifn 6) |
5 | p2p | 10.1.7.1 | 10.1.7.2 (SLC ifn 5) |
6 | p2p | 10.1.8.1 | 10.1.8.2 (SLC ifn 6) |
Salt Lake City:
Interface | Type | IP Address | Peer Address |
---|---|---|---|
0 | inet | 64.57.23.178 | 0.0.0.0 |
1 | inet | 64.57.23.182 | 0.0.0.0 |
2 | inet | 64.57.23.186 | 0.0.0.0 |
3 | p2p | 10.1.1.2 | 10.1.1.1 (KC ifn 3) |
4 | p2p | 10.1.2.2 | 10.1.2.1 (KC ifn 4) |
5 | p2p | 10.1.7.2 | 10.1.7.1 (DC ifn 5) |
6 | p2p | 10.1.8.2 | 10.1.8.1 (DC ifn 6) |
Kansas City:
Interface | Type | IP Address | Peer Address |
---|---|---|---|
0 | inet | 64.57.23.210 | 0.0.0.0 |
1 | inet | 64.57.23.214 | 0.0.0.0 |
2 | inet | 64.57.23.218 | 0.0.0.0 |
3 | p2p | 10.1.1.1 | 10.1.1.2 (SLC ifn 3) |
4 | p2p | 10.1.2.1 | 10.1.2.2 (SLC ifn 4) |
5 | p2p | 10.1.3.1 | 10.1.3.2 (DC ifn 3) |
6 | p2p | 10.1.4.1 | 10.1.4.2 (DC ifn 4) |
Resources
Examples of Configuration Displays
What follows is the output of the get-info.sh script for the three GENI SPPs. The annotated output below shows which commands were used to produce the output.
<< DC 64.57.23.194 >> Get list of available interfaces: scfg --cmd get_ifaces Interface list: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.194] [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.198] [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202] [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2] [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2] [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1] [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1] Get IP address of peer: scfg --cmd get_peer --ifn N Interface 0 SPP Peer IP address: 0.0.0.0 Interface 1 SPP Peer IP address: 0.0.0.0 Interface 2 SPP Peer IP address: 0.0.0.0 Interface 3 SPP Peer IP address: 10.1.3.1 Interface 4 SPP Peer IP address: 10.1.4.1 Interface 5 SPP Peer IP address: 10.1.7.2 Interface 6 SPP Peer IP address: 10.1.8.2 Get interface attributes: scfg --cmd get_attrs --ifn N Interface 0 Interface attributes: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.194] Interface 1 Interface attributes: [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.198] Interface 2 Interface attributes: [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202] Interface 3 Interface attributes: [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2] Interface 4 Interface attributes: [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2] Interface 5 Interface attributes: [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1] Interface 6 Interface attributes: [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1] << SLC 64.57.23.210 >> Get list of available interfaces: scfg --cmd get_ifaces Interface list: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.210] [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.214] [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.218] [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.2] [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.2] [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.2] [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2] Get IP address of peer: scfg --cmd get_peer --ifn N Interface 0 SPP Peer IP address: 0.0.0.0 Interface 1 SPP Peer IP address: 0.0.0.0 Interface 2 SPP Peer IP address: 0.0.0.0 Interface 3 SPP Peer IP address: 10.1.1.1 Interface 4 SPP Peer IP address: 10.1.2.1 Interface 5 SPP Peer IP address: 10.1.7.1 Interface 6 SPP Peer IP address: 10.1.8.1 Get interface attributes: scfg --cmd get_attrs --ifn N Interface 0 Interface attributes: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.210] Interface 1 Interface attributes: [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.214] Interface 2 Interface attributes: [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.218] Interface 3 Interface attributes: [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.2] Interface 4 Interface attributes: [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.2] Interface 5 Interface attributes: [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.2] Interface 6 Interface attributes: [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2] << KC 64.57.23.178 >> Get list of available interfaces: scfg --cmd get_ifaces Interface list: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.178] [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.182] [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.186] [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.1] [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.1] [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.1] [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1] Get IP address of peer: scfg --cmd get_peer --ifn N Interface 0 SPP Peer IP address: 0.0.0.0 Interface 1 SPP Peer IP address: 0.0.0.0 Interface 2 SPP Peer IP address: 0.0.0.0 Interface 3 SPP Peer IP address: 10.1.1.2 Interface 4 SPP Peer IP address: 10.1.2.2 Interface 5 SPP Peer IP address: 10.1.3.2 Interface 6 SPP Peer IP address: 10.1.4.2 Get interface attributes: scfg --cmd get_attrs --ifn N Interface 0 Interface attributes: [ifn 0, type "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.178] Interface 1 Interface attributes: [ifn 1, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.182] Interface 2 Interface attributes: [ifn 2, type "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.186] Interface 3 Interface attributes: [ifn 3, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.1] Interface 4 Interface attributes: [ifn 4, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.1] Interface 5 Interface attributes: [ifn 5, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.1] Interface 6 Interface attributes: [ifn 6, type "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1]