Difference between revisions of "The GENI SPP Configurations"

From ARL Wiki
Jump to navigationJump to search
m
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
[Category:The SPP]
+
[[Category:The SPP]]
  
 
= Getting SPP Configurations =
 
= Getting SPP Configurations =
Line 12: Line 12:
  
 
Examples of the displays are shown at the end of this page.
 
Examples of the displays are shown at the end of this page.
 +
Enter:
 +
 +
<pre>
 +
scfg --help info
 +
</pre>
 +
 +
to see what other information command options there are.
  
 
= IP Addresses =
 
= IP Addresses =
Line 26: Line 33:
 
| 2 || inet || 64.57.23.202 || 0.0.0.0
 
| 2 || inet || 64.57.23.202 || 0.0.0.0
 
|- align="center"
 
|- align="center"
| 3 || p2p  || 10.1.3.2    || 10.1.3.1
+
| 3 || p2p  || 10.1.3.2    || 10.1.3.1 (KC ifn 5)
 
|- align="center"
 
|- align="center"
| 4 || p2p  || 10.1.12.1    || 10.1.12.2
+
| 4 || p2p  || 10.1.4.2    || 10.1.4.1 (KC ifn 6)
 
|- align="center"
 
|- align="center"
| 5 || p2p  || 10.1.4.2     || 10.1.4.1
+
| 5 || p2p  || 10.1.7.1     || 10.1.7.2 (SLC ifn 5)
 
|- align="center"
 
|- align="center"
| 6 || p2p  || 10.1.7.1    || 10.1.7.2
+
| 6 || p2p  || 10.1.8.1    || 10.1.8.2 (SLC ifn 6)
|- align="center"
 
| 7 || p2p  || 10.1.8.1    || 10.1.8.2
 
 
|}
 
|}
  
Line 42: Line 47:
 
! Interface || Type || IP Address || Peer Address
 
! Interface || Type || IP Address || Peer Address
 
|- align="center"
 
|- align="center"
| 0 || inet || 64.57.23.178 || 0.0.0.0
+
| 0 || inet || 64.57.23.210 || 0.0.0.0
 
|- align="center"
 
|- align="center"
| 1 || inet || 64.57.23.182 || 0.0.0.0
+
| 1 || inet || 64.57.23.214 || 0.0.0.0
 
|- align="center"
 
|- align="center"
| 2 || inet || 64.57.23.186 || 0.0.0.0
+
| 2 || inet || 64.57.23.218 || 0.0.0.0
 
|- align="center"
 
|- align="center"
| 3 || p2p  || 10.1.1.2    || 10.1.1.1
+
| 3 || p2p  || 10.1.1.2    || 10.1.1.1 (KC ifn 3)
 
|- align="center"
 
|- align="center"
| 4 || p2p  || 10.1.2.2    || 10.1.2.1
+
| 4 || p2p  || 10.1.2.2    || 10.1.2.1 (KC ifn 4)
 
|- align="center"
 
|- align="center"
| 5 || p2p  || 10.1.7.2    || 10.1.7.1
+
| 5 || p2p  || 10.1.7.2    || 10.1.7.1 (DC ifn 5)
 
|- align="center"
 
|- align="center"
| 6 || p2p  || 10.1.8.2    || 10.1.8.1
+
| 6 || p2p  || 10.1.8.2    || 10.1.8.1 (DC ifn 6)
 
|}
 
|}
 
'''Kansas City:'''
 
'''Kansas City:'''
Line 61: Line 66:
 
! Interface || Type || IP Address || Peer Address
 
! Interface || Type || IP Address || Peer Address
 
|- align="center"
 
|- align="center"
| 0 || inet || 64.57.23.210 || 0.0.0.0
+
| 0 || inet || 64.57.23.178 || 0.0.0.0
 
|- align="center"
 
|- align="center"
| 1 || inet || 64.57.23.214 || 0.0.0.0
+
| 1 || inet || 64.57.23.182 || 0.0.0.0
 
|- align="center"
 
|- align="center"
| 2 || inet || 64.57.23.218 || 0.0.0.0
+
| 2 || inet || 64.57.23.186 || 0.0.0.0
 
|- align="center"
 
|- align="center"
| 3 || p2p  || 10.1.1.1    || 10.1.1.2
+
| 3 || p2p  || 10.1.1.1    || 10.1.1.2 (SLC ifn 3)
 
|- align="center"
 
|- align="center"
| 4 || p2p  || 10.1.2.1    || 10.1.2.2
+
| 4 || p2p  || 10.1.2.1    || 10.1.2.2 (SLC ifn 4)
 
|- align="center"
 
|- align="center"
| 5 || p2p  || 10.1.3.1    || 10.1.3.2
+
| 5 || p2p  || 10.1.3.1    || 10.1.3.2 (DC ifn 3)
 
|- align="center"
 
|- align="center"
| 6 || p2p  || 10.1.4.1    || 10.1.4.2
+
| 6 || p2p  || 10.1.4.1    || 10.1.4.2 (DC ifn 4)
 
|}
 
|}
  
Line 79: Line 84:
  
 
= Examples of Configuration Displays =
 
= Examples of Configuration Displays =
 +
 +
What follows is the output of the ''get-info.sh'' script for the three GENI SPPs.
 +
The annotated output below shows which commands were used to produce the output.
  
 
<pre>
 
<pre>
+++ Doing DC 64.57.23.194
+
<< DC 64.57.23.194 >>
  
 
Get list of available interfaces:  scfg --cmd get_ifaces
 
Get list of available interfaces:  scfg --cmd get_ifaces
Line 90: Line 98:
 
   [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202]
 
   [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202]
 
   [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2]
 
   [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2]
   [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.12.1]
+
   [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2]
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2]
+
   [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1]
   [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1]
+
   [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1]
   [ifn 7, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1]
 
  
 
Get IP address of peer:  scfg --cmd get_peer --ifn N
 
Get IP address of peer:  scfg --cmd get_peer --ifn N
Line 101: Line 108:
 
Interface 2 SPP Peer IP address: 0.0.0.0
 
Interface 2 SPP Peer IP address: 0.0.0.0
 
Interface 3 SPP Peer IP address: 10.1.3.1
 
Interface 3 SPP Peer IP address: 10.1.3.1
Interface 4 SPP Peer IP address: 10.1.12.2
+
Interface 4 SPP Peer IP address: 10.1.4.1
Interface 5 SPP Peer IP address: 10.1.4.1
+
Interface 5 SPP Peer IP address: 10.1.7.2
Interface 6 SPP Peer IP address: 10.1.7.2
+
Interface 6 SPP Peer IP address: 10.1.8.2
  
 
Get interface attributes:  scfg --cmd get_attrs --ifn N
 
Get interface attributes:  scfg --cmd get_attrs --ifn N
Line 116: Line 123:
 
   [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2]
 
   [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2]
 
Interface 4 Interface attributes:
 
Interface 4 Interface attributes:
   [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.12.1]
+
   [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2]
 
Interface 5 Interface attributes:
 
Interface 5 Interface attributes:
   [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2]
+
   [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1]
 
Interface 6 Interface attributes:
 
Interface 6 Interface attributes:
   [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1]
+
   [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1]
  
+++ Doing SLC 64.57.23.210
+
<< SLC 64.57.23.210 >>
  
Get list of available interfaces:
+
Get list of available interfaces: scfg --cmd get_ifaces
  
 
Interface list:
 
Interface list:
Line 135: Line 142:
 
   [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2]
 
   [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2]
  
Get IP address of peer:
+
Get IP address of peer: scfg --cmd get_peer --ifn N
  
 
Interface 0 SPP Peer IP address: 0.0.0.0
 
Interface 0 SPP Peer IP address: 0.0.0.0
Line 145: Line 152:
 
Interface 6 SPP Peer IP address: 10.1.8.1
 
Interface 6 SPP Peer IP address: 10.1.8.1
  
Get interface attributes:
+
Get interface attributes: scfg --cmd get_attrs --ifn N
  
 
Interface 0 Interface attributes:
 
Interface 0 Interface attributes:
Line 162: Line 169:
 
   [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2]
 
   [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2]
  
+++ Doing KC 64.57.23.178
+
<< KC 64.57.23.178 >>
  
Get list of available interfaces:
+
Get list of available interfaces: scfg --cmd get_ifaces
  
 
Interface list:
 
Interface list:
Line 175: Line 182:
 
   [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1]
 
   [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1]
  
Get IP address of peer:
+
Get IP address of peer: scfg --cmd get_peer --ifn N
  
 
Interface 0 SPP Peer IP address: 0.0.0.0
 
Interface 0 SPP Peer IP address: 0.0.0.0
Line 185: Line 192:
 
Interface 6 SPP Peer IP address: 10.1.4.2
 
Interface 6 SPP Peer IP address: 10.1.4.2
  
Get interface attributes:
+
Get interface attributes: scfg --cmd get_attrs --ifn N
  
 
Interface 0 Interface attributes:
 
Interface 0 Interface attributes:

Latest revision as of 06:58, 28 February 2010


Getting SPP Configurations

The scfg (Slice Configuration) command can be used to display the attributes of SPP interfaces. The two most common commands are:

scfg --cmd get_ifaces           # display attributes of all interfaces
scfg --cmd get_peer --ifn N     # display IP address of interface N's peer

Examples of the displays are shown at the end of this page. Enter:

scfg --help info

to see what other information command options there are.

IP Addresses

Washington DC:

Interface Type IP Address Peer Address
0 inet 64.57.23.194 0.0.0.0
1 inet 64.57.23.198 0.0.0.0
2 inet 64.57.23.202 0.0.0.0
3 p2p 10.1.3.2 10.1.3.1 (KC ifn 5)
4 p2p 10.1.4.2 10.1.4.1 (KC ifn 6)
5 p2p 10.1.7.1 10.1.7.2 (SLC ifn 5)
6 p2p 10.1.8.1 10.1.8.2 (SLC ifn 6)

Salt Lake City:

Interface Type IP Address Peer Address
0 inet 64.57.23.210 0.0.0.0
1 inet 64.57.23.214 0.0.0.0
2 inet 64.57.23.218 0.0.0.0
3 p2p 10.1.1.2 10.1.1.1 (KC ifn 3)
4 p2p 10.1.2.2 10.1.2.1 (KC ifn 4)
5 p2p 10.1.7.2 10.1.7.1 (DC ifn 5)
6 p2p 10.1.8.2 10.1.8.1 (DC ifn 6)

Kansas City:

Interface Type IP Address Peer Address
0 inet 64.57.23.178 0.0.0.0
1 inet 64.57.23.182 0.0.0.0
2 inet 64.57.23.186 0.0.0.0
3 p2p 10.1.1.1 10.1.1.2 (SLC ifn 3)
4 p2p 10.1.2.1 10.1.2.2 (SLC ifn 4)
5 p2p 10.1.3.1 10.1.3.2 (DC ifn 3)
6 p2p 10.1.4.1 10.1.4.2 (DC ifn 4)

Resources

Examples of Configuration Displays

What follows is the output of the get-info.sh script for the three GENI SPPs. The annotated output below shows which commands were used to produce the output.

<< DC 64.57.23.194 >>

Get list of available interfaces:  scfg --cmd get_ifaces

Interface list:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.194]
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.198]
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202]
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2]
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2]
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1]
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1]

Get IP address of peer:  scfg --cmd get_peer --ifn N

Interface 0 SPP Peer IP address: 0.0.0.0
Interface 1 SPP Peer IP address: 0.0.0.0
Interface 2 SPP Peer IP address: 0.0.0.0
Interface 3 SPP Peer IP address: 10.1.3.1
Interface 4 SPP Peer IP address: 10.1.4.1
Interface 5 SPP Peer IP address: 10.1.7.2
Interface 6 SPP Peer IP address: 10.1.8.2

Get interface attributes:  scfg --cmd get_attrs --ifn N

Interface 0 Interface attributes:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.194]
Interface 1 Interface attributes:
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.198]
Interface 2 Interface attributes:
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.202]
Interface 3 Interface attributes:
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.2]
Interface 4 Interface attributes:
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.2]
Interface 5 Interface attributes:
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.1]
Interface 6 Interface attributes:
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.1]

<< SLC 64.57.23.210 >>

Get list of available interfaces:  scfg --cmd get_ifaces

Interface list:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.210]
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.214]
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.218]
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.2]
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.2]
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.2]
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2]

Get IP address of peer:  scfg --cmd get_peer --ifn N

Interface 0 SPP Peer IP address: 0.0.0.0
Interface 1 SPP Peer IP address: 0.0.0.0
Interface 2 SPP Peer IP address: 0.0.0.0
Interface 3 SPP Peer IP address: 10.1.1.1
Interface 4 SPP Peer IP address: 10.1.2.1
Interface 5 SPP Peer IP address: 10.1.7.1
Interface 6 SPP Peer IP address: 10.1.8.1

Get interface attributes:  scfg --cmd get_attrs --ifn N

Interface 0 Interface attributes:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.210]
Interface 1 Interface attributes:
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.214]
Interface 2 Interface attributes:
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.218]
Interface 3 Interface attributes:
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.2]
Interface 4 Interface attributes:
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.2]
Interface 5 Interface attributes:
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.7.2]
Interface 6 Interface attributes:
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.8.2]

<< KC 64.57.23.178 >>

Get list of available interfaces:  scfg --cmd get_ifaces

Interface list:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.178]
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.182]
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.186]
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.1]
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.1]
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.1]
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1]

Get IP address of peer:  scfg --cmd get_peer --ifn N

Interface 0 SPP Peer IP address: 0.0.0.0
Interface 1 SPP Peer IP address: 0.0.0.0
Interface 2 SPP Peer IP address: 0.0.0.0
Interface 3 SPP Peer IP address: 10.1.1.2
Interface 4 SPP Peer IP address: 10.1.2.2
Interface 5 SPP Peer IP address: 10.1.3.2
Interface 6 SPP Peer IP address: 10.1.4.2

Get interface attributes:  scfg --cmd get_attrs --ifn N

Interface 0 Interface attributes:
  [ifn 0, type  "inet", linkBW 1000000Kbps, availBW 899808Kbps, ipAddr 64.57.23.178]
Interface 1 Interface attributes:
  [ifn 1, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.182]
Interface 2 Interface attributes:
  [ifn 2, type  "inet", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 64.57.23.186]
Interface 3 Interface attributes:
  [ifn 3, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.1.1]
Interface 4 Interface attributes:
  [ifn 4, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.2.1]
Interface 5 Interface attributes:
  [ifn 5, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.3.1]
Interface 6 Interface attributes:
  [ifn 6, type  "p2p", linkBW 1000000Kbps, availBW 899744Kbps, ipAddr 10.1.4.1]